PATH=C:\Raisonance\Ride\Bin;C:\Raisonance\Ride\arm-gcc\bin

I don't have a "GCC_EXEC_PREFIX" enironment variable

----------------Build Started: 'testR7' in configuration ''--------------------------

Building C:\Raisonance\Ride\Examples\ARM\test\main.c
Running: GCC
\"C:\Raisonance\Ride\arm-gcc\bin\arm-none-eabi-gcc.exe" -MD -D_STM32F103RBT6_ -D_STM3x_ -D_STM32x_ -mthumb -mcpu=cortex-m3 "C:\Raisonance\Ride\Examples\ARM\test\main.c" -o "C:\Raisonance\Ride\Examples\ARM\test\main.o" -I "." -I "C:\Raisonance\Ride\Lib\ARM\include" -c -fsigned-char -g -O1 -ffunction-sections -mlong-calls -mlittle-endian
arm-none-eabi-gcc.exe: CreateProcess: No such file or directory

Build failed

Hi,

Which version of Windows (and service packs) are you using?
Are you administrator?
Are you using the same user account that was used to install Ride?

Can you please check that the gcc file ("C:\Raisonance\Ride\arm-gcc\bin\arm-none-eabi-gcc.exe") has been correctly installed on your drive?

If it does, please open a command prompt, change directory to "C:\Raisonance\Ride\Examples\ARM\test", and execute "arm-none-eabi-gcc.exe". It should tell you "no input file". Then, please try to execute the complete command line from Ride that you quoted.

Tell me how it goes and I will have a better understanding of the problem.

Best Regards,

Vincent

Windows XP SP2
I am administrator

C:\Raisonance\Ride\Examples\ARM\test>arm-none-eabi-gcc.exe
arm-none-eabi-gcc.exe: no input files

When I try to execute the complete command line from Ride

arm-none-eabi-gcc.exe: CreateProcess: No such file or directory

When I try to execute simple file

void main(void)
{
return;
}

arm-none-eabi-gcc.exe: CreateProcess: No such file or directory

Hi,

gcc is found, but the problem is that gcc doesn't manage to call one of its subprograms. (preprocessor, compiler, assembler, ...)
That can be due to an installation problem (some file not copied) or a conflict with another program with the same name and the path appearing before gcc's.

Please run the complete command line again, but add option "-E". This will tell gcc to stop after the preprocessing.
If it succeeds, then that means that the preprocessor if found.
Then, try again with option "-S". (instead of "-E") This tells GCC to preprocess and compile but not assemble. If that succeeds, it means gcc finds the preprocessor and the compiler.

Best Regards,

Vincent