Topic : Problem with the professional version of Ride7

Forum : Ride IDE

Original Post
Post Information Post
July 24, 2009 - 4:26pm
Guest

Dear Sirs, today we received the professional version of Ride7 with the USB dongle.
We followed the instructions and if we check in the "about" menù, we can see two item:

Ride7 IDE version 7.18.0903 Fully functional, no serialization needed
RKit-STM8 for Ride7 2.16.0903 Rkit-STM8 - Professional Suite

It seems that everything has been installed properly, but when we try to build ANY of our projects, in the Build Log the linker return this message:

Building C:\Programmi\Raisonance\Ride\examples\STM8\C\TOWERS\TowersSTM8.rapp
Running: RLST7
\"C:\Programmi\Raisonance\Ride\Bin\RLSTM8.EXE" -CP
[...]
LINKER/LOCATOR RLST7 V2.17.01 Evaluation (4 Kb code limited)

It seems that only the linker is still in evaluation mode. How can we fix this problem?

Thank you in advance
Replies
Post Information Post
+1
0
-1
August 3, 2009 - 11:55am
Guest

Atleast for the STM32 you have to change "Starter Kit Limitation" to NO.
The property can be found under
In the properties for the current project under Project->properties->LD Linker -> Scripts
+1
0
-1
August 3, 2009 - 1:59pm
Guest

We are going to check. We got today a similar report from another customer, and it could be that some files are (either missing or) wrong on the CD you received. In this cas we will send you soon the files.
+1
0
-1
August 3, 2009 - 3:30pm
Guest

I just checked with the version that is currently available on the web site, and it works fine. However, I found one problem: the CodeCompressor tool is reported as bein in evaluation mode. It should not. But the reported information is wrong: the CodeCompressor works well when the dongle is present...