Forum : 8051
Original Post
| Post Information | Post |
|---|---|
|
March 15, 2007 - 10:03pm
|
A project I've been working won't load to its Silicon Labs target via JTAG. Instead RIDE quits when the 'Start' Ctrl-D command is issued. The hex file will load fine via the 'Load' command Ctr-L. Other projects will load to the same target using Ctrl-D. This has happened before and I got round it by recreating the project from the ground up. Same files, same locations, same build. This leaves the project file as suspect. What's the best way to proceed. I would rather fix up the current project than remake it. RIDE is BN746-51 regards Steven Pruzina |
Such problems could be caused by some inconsistent debugging information contained into the ".wmc" or ".dbi" (more rarely) files. Removing these files could be a faster way than rebuilding the project.
Francis
I did delete the .wmc and .dbi files and build clean. This didn't help; RIDE still quit on a download
What worked was to remake the project (.prj), starting from an existing similar .prj. The remade project is pretty close to the original. I'm emailing the 2 .prj files. Please Diff them and see if anything stands out.
Steven
This topic has been continued by email.