Hi.

Thanks for your former help Vincent. I have another problem though;

I have some code that needs to go into bank 0 of our STR710FZ2, and some other code that needs to go into bank 1. Using RFlasher this is easily achieved, but STR7_pgm.exe doesn't allow me to program into bank 1. It seems to program just fine (and takes a long time finishing - much longer than RFlasher with the same task), and ends without error. But upon checking the flash bank 1 is blank - nothing is programmed in bank 1. I use this command line for instance:

"STR7_pgm.exe TSTR710FZ2 PC:\B1.hex" B1.hex containing records to go into memory space from 0x400C0000 to 0x400C3FFF. And all this works with the exact same setup from RFlasher mind you.

A secondary problem is that if I program something in bank 0 and then something else in bank 1 (with RFlasher), then I cannot verify the content of bank 1, since verify complains about the content of bank 0 (it expects all of bank 0 to be 0xFF since the file with which I verify bank 1 against does not contain any records in bank 0 memory space). And STR7_pgm.exe does not honor the S switch so I potentially could ask it only to verify bank 1 and never mind bank 0. Are there plans on implementing the use of switch S in the STR7_pgm.exe, or will this switch not ever be useful for anything?

Thanks for your time.

Cheers,
Steen