Topic : Trouble witch debug

Forum : ARM

Original Post
Post Information Post
March 27, 2008 - 8:55am
Guest

Hi

I have trouble with my RLink. After download program, RIDE automaticaly start debug and I can't stop it. When I tray RIDE answer "Unable to stop the target. Core does not acknowledge"

I use RLink STD ver. 3.4 witch RIDE7 and evaluate board witch dip ARM STR912FW44

RLink Serial number dngSTD000002891
Target's IdCode :

BS: 0x1457F041
CPU: 0x25966041
PLD: 0x04570041

I can write program but I can't debug it.
Replies
Post Information Post
+1
0
-1
April 2, 2008 - 12:22pm
Guest

Hi

For people that meet the same problem with their RLink you can first check in the schematic of the board you use that:
+ The signal JRST and RST are not connected together and that they are actually connected to the RLink
We found out that in some boards such as the one from Olimex(for STM32) there is a jumper that allows this operation
+ Also you need to make sure that the DBGRQ is not connected to the RLINK

We are now with the help of Prezm trying to found out where is the problem with the other board they use which is from Kamami
We will let you know as soon as could make some tests

bye