Hi,

There is a display bug in the ST7_pgm. I will correct it and then it will answer this:
Error 103: Option byte verification failed: read 0x680E instead of 0x480E

But it is just a bug in the displaying of the expected value. (wrong % in a printf...)
It doesn't affect the behavior more than the error message.

Now, please take a look at the ST72561 datasheet from ST, page 252:
http://www.st.com/stonline/books/pdf/docs/10022.pdf

You will see that the bit number 5 of the Option Byte 0 is reserved and fixed to 1.
But in the value you ask the software to program (0x480E), this bit is set to zero.
This is why when you ask to program 0x480E, it really programs 0x680E. And then the verification fails because the programmed value is different from the requested value!
So you should program 0x680E, because 0x480E is not a valid value.

I can send you a patched version with the display bug corrected, but it won't be very different from the one you have, and changing the 0x480E to a 0x680E should be enough to unlock you, so there is not much point.
If you still want it, please send an email requesting it to 'support@raisonance.com'. (include a link to this post in the email)

Best Regards,

Vincent