Forum : ST7/STM8
Original Post
Post Information | Post |
---|---|
March 6, 2007 - 12:36pm
|
using ST7 Visual Develop Version 3.3.0.0, when I select ST7FLITE09 as the MCU the lcd RLINK is not availiable it is there for the ST7FLITE29 Does this RLink device not support the 09 or do I need some different software? Regards Dave |
To know the list of devices supported by ST Visual Develop with RLink, you must contact ST Microelectronics directly.
The RLink fully supports the ST7LITE09. You can use RIDE, RFlasher or st7_pgm to program this microcontroller. These utilities are available in our software suite for ST7 family.
regards,
Lionel