Topic : Error resetting in ICC Mode

Original Post

Post Information	Post
November 2, 2010 - 1:46pm Guest	Hardware Tool - RLink - STD Software Tool - RFlasher Controller - ST72F561K9TA I have interfaced the controller using RLink. On trying to communicate with the controller I am getting the error - Error resetting in ICC Mode. If required, I can attach the part of the schematic. What will be the signal levels / Wave forms on the pins - after just connecting to the RLink std.

Replies

Post Information	Post
+1 0 -1 November 3, 2010 - 4:11pm Guest	Hi, I need the answer to question: which versions of the kits are installed. Check that you are using the latest versions. This is critical. I also need to know the jumpers settings on the ADP. Seeing the schematic, you should plug jumpers ICC and 12MHz, but not PW-5V nor Adapt if you have the RLink-ADP-ST7-STM8. Finally, please try to connect using both "default option bytes" and "custom option bytes" methods. Tell us if it changes anything. (different error message, etc.) Regards
+1 0 -1 November 8, 2010 - 12:21pm Guest	Hi, The following versions I am using and I belive they are latest : Ride 7 - Version 7.30.10.0159 RKit-STM8 for Ride7 - Version 2.30.10.0175 Ride7 Patch - Version 7.30.10.0169 Since I am working on ST7 family - ST72F561K9TA, all jumpers are kept open. Error message - The window has the following options - Option Bytes Options Action when programming Leave as is (Checked) What should be the jumper settings when I am using - 1. ST7F2561 Micrcontroller 2. I am providing external Vcc to my application board 3. I have 16MHz crystal on the application board Hope I have answered to the points The adaptor board, I am using is - RLink-ADP-ST7-STM8 V2.1.
+1 0 -1 November 9, 2010 - 8:48am Guest	Thanks I got it.
+1 0 -1 February 19, 2013 - 7:17am Guest	i am also having the problem as error resetting in ICC mode.i have checked the voltage levels as that mentioned in other problem.i have programed few modules of mine n my two Rflasher dongles have become faulty.. the details are given hereby: Ride7 version 7.30.10.0159 Rkit STM8 for Ride7 2.30.10.0175
+1 0 -1 February 21, 2013 - 7:29am Guest	Hardware Tool - RLink V3.4 Software Tool - RFlasher Controller - ST72561K6 I have interfaced the controller using RLink. On trying to communicate with the controller I am getting the error - Error resetting in ICC Mode. I Required schematic of rlink motherboard as well as doughter board details motherbord pcb no :Rlink V3.4 Doughterboard :Rlink-ADP-ST7-STMB V2.1. What will be the signal levels / Wave forms on the pins - after just connecting to the RLink std.
+1 0 -1 November 6, 2023 - 11:45am vincent choplin	Hi, There are many possible explanations for this problem. We will need more information for helping you. Please fill this form and send the answers to : http://support.raisonance.com/node/430017 (used to be: http://forum.raisonance.com/viewtopic.php?id=2231) Best Regards, Etienne