Forum : ST7/STM8
Original Post
| Post Information | Post |
|---|---|
|
October 5, 2011 - 6:11pm
|
I am looking for the part number / ordering information for connector J3 on this schematic. I am needing a longer cable to place inside of an enclosure, so I would like to make a new one to just leave connect to the board at at times. Any help would be greatly appreciated. Adam |
Hi Adam,
Here is our reference for this part:
Manufacturer: JST Sales America Inc
Reference: S04B-PASK-2(LF)(SN)
Description: CONN HEADER PA 4POS SIDE 2MM TIN
Digikey:455-1849-ND
I hope this helps,
Well shoot. I was looking at the schematic wrong. I actually need the other end of the cable, J4. I don't know why I did not look at the nets connected to J3 indicating that it was on the PCB itself.
Do you happen to have the same information for J4 instead.
Thanks again.
Hi,
J4 is not connected. It is some HE10 terminator.
BR
Well those are the lines I was needed. Rather than keep guessing at the connection designators see the picture below. I am needing the black/broken end of this cable. ...flickr.com/photos/68394150@N06/6219869137/ Thanks!
Just checking to see if anyone knows what this part number is.
Hi, The ERNI 4-pins connector is the standard chosen by ST for SWIM/STM8. See the ST docs for more information. For making our adapters we get them from :ERNI, ref. 839071
On the other side, on the ADP, we use this: http://radiospares-fr.rs-online.com/web/p/products/4766782/?searchTerm=PAP-04V-S&relevancy-data=636F3D3126696E3D4931384E4272616E644D504E266C753D6672266D6D3D6D61746368616C6C26706D3D5E285C772B5B2D5C2E5C732F5D292B285C772B293F2426706F3D3526736E3D592673743D4B4559574F52445F4D554C54495F414C5048415F4E554D45524943267573743D5041502D3034562D532677633D4E4F4E4526 Best Regards, Vincent