Topic : program the M24LR discovery

Forum : ST7/STM8

Original Post
Post Information Post
March 5, 2014 - 4:09pm
Guest

Hi, I just resolved y compilation problem I had before (last new post).

Now I wanted to get some help about hte programming steps. I made an insignificant modification to the original code, just to see if the programming process is ok. Then, in the STDV programming option I selected:
- In setting tab, selected stlink / usb/ swim. ( I am using a ST LINK / v2)
- In data memory of memory areas tab I did´t do anything.
- In programm memory I added the .s19 file that came originally in the Debug folder inside of the orginal code folders.
- In the option bytes i didn´t modify anything and checked the Program even if default option.

When I start programming, it said that the blank check was not feasible, but it dindt return any error. However, I noticed that the pocess was not succesful beacuse there were no changes.

Does someone has any to comment about my programming settings?

Replies
Post Information Post
+1
0
-1
March 6, 2014 - 2:41pm
Raisonance Support Team

Hello,

ST-Link are not supported by Ride7 for the moment.

Best regards,