Topic : Configuring chip - STR91XF

Forum : ARM

Original Post
Post Information Post
February 11, 2007 - 10:47am
Guest

Hi All

I have been trying to configure the STR91 to boot from the secondary 32k bank. Using the ST CAPs program together with RLink it works well but I don´t seem to find a method to do the same thing in the Raisonance program - it has various possibilities to set things like user data and the OTP values but I can´t find anything for the configuration. Am I looking in the wrong place or is this missing?

Best regards

Mark

www.uTasker.com
Replies
Post Information Post
+1
0
-1
February 12, 2007 - 4:01pm
Guest

Hello,

if by 'booting from the secondary bank', you mean place this bank at address 0x00000000 in FLASH, it is possible, from RIDE, by going to Options->Target->Options and checking the 'CSX=1' box, meaning that you invert the banks relative positioning. The 32k secondary bank will then be placed at address 0, and therefore will be used for booting.

This option is only visible if you applied the latest patches for ARM family.

regards
Lionel
+1
0
-1
February 13, 2007 - 12:36am
Guest

Lionel

Yes, I mean placing bank 1 at 0x00000000.
The option was not visible so I will download the patch.

Many thanks

Mark