Topic : Problem writing to flash bank 1 with Rlink

Forum : ARM

Original Post
Post Information Post
May 28, 2007 - 12:55am
Guest

Greetings,

I am burning a hex file to flash. It contains code at addres 0x20000000 (bank 0 sector 0) and data at address 0x200c0000 (bank 1 sector 0) yet only the code gets written to flash.

Im using the 'debug' interface of RIDE with the basic RLink jtag module. The chip is str750fv2 on st's str75x-eval dev board.

Anyone facing the same issue?

Thx

Pat Mahoney, www.imetrik.com
Replies
Post Information Post
+1
0
-1
May 28, 2007 - 9:39am
Raisonance Support Team

Hi,

We found this bug in RFlasher and RIDE last week. We are working on it.

We could already correct the programation executable, which you will find there:
ftp://www.raisonance.com/temp/ST/STR7_pgm_test_070404.zip

Please first check that you are using the latest version of RIDE: BN746-P1-P2 or BN746-P1-P2-P3.

Best Regards,

Vincent