Topic : Flakey Debugging on STR912FAW44

Forum : ARM

Original Post
Post Information Post
September 30, 2008 - 7:49am
Guest

I am using Ride7 V7.10.0000 + RKit-ARM (1.10.0000) with Rlink Pro. PC is running Windows XP SP2 with 1GB RAM.

I find that debugging is very flakey.
- Half the time, the debugger doesn't get to Main() without having to reset after starting the debugger.
- When single stepping, even with no breakpoints set, I very often get "No more hardwarebreakpoints unit available" and after that I have to exit the debugger and start again.

Anyone with any suggestions of what the problem might be?
Replies
Post Information Post
+1
0
-1
October 1, 2008 - 4:01pm
Guest

Hi Bart

I have made some trials with the same micro and software version and I do not reproduce the problem.

Here are some points I can suggest to help us finding where is the problem:
1. You can try to debug one of the application example given with Ride7 and see if the problem is still there.
2. Can you try to send me a simple project (all the files concerning this project are needed) that shows this behaviour.

Matloub