Topic : not able to program STM32F101 with RLink !!!!!!!!!

Forum : ARM

Original Post
Post Information Post
March 25, 2009 - 11:12pm
Guest

Hi.

I' m using an RLink with serial nr. "dngSTD000013253" and RFlasher7 Ride7 IDE version 7.02.0001 RKitARM for RIDE7 version 1.04.0001.

With these tools I'm not able to program the STM32F101VET6 devices,
as I have the same identical problem that Mr. LarryKoen found and described on this forum on Apr. 4, 2008 ("Can't program STM32 with RFlasher/Rlink").

If I try to run the verify after the programming,
I obtain several OPI ARM error message like this:

"Error: Flash and Memory are different at address 0x8007000
Found 0x80 in Flash expected 0x3
The addresses higher than this have not been tested"

Please note I'm perfectly able to program the same devices using a competitor JTAG programmer !

Could you help me as soon as possible ???
It 's very urgent, as I'm convincing my customer to buy some RLinks.....

Thank you,
Marco
Replies
Post Information Post
+1
0
-1
March 26, 2009 - 9:46am
Raisonance Support Team

Hi,

The first thing to do is to install the latest versions of the Ride and ARM kits. The ones you are using are quite old.
You can download the latest versions on our website. (and there will be even newer ones this evening or tomorrow, as we are testing them right now)

If it still doesn't work, then you can try to select STM32F103VET6 instead of the 101. These two devices are identical as long as only flash programming is concerned, but we made much more tests with the 103, as it is the one we use in our Primer2.

If it still doesn't work, then I will need more information on your PC, STM32 board, project, etc. In this case, please fill this form in:
http://raisonance-forum.xsalto.com/viewtopic.php?id=2231

Best Regards,

Vincent
+1
0
-1
March 26, 2009 - 10:12am
Guest

Thank you Vincent.

I'll try your suggestions in the next minutes.
Sorry, I did not recognized the software included in the disc packed with the Rlink box
is so old........

Let me check.
Ciao
+1
0
-1
March 26, 2009 - 10:18am
Guest

Vincent, sorry but I'm not able to locate the download page in the Raisonance web site.

Could you give me the appropriate link directly here ?

Thank you.
+1
0
-1
March 26, 2009 - 10:37am
Guest

In order to find out the download page, I registered on your website.
I received the password by e-mail but the server is not allowing me to access !
+1
0
-1
March 26, 2009 - 10:41am
Guest

The error message from your server is:
"Your account is no longer valid. Please contact the administrator."

I already requested three new password, but the story is always the same......

Please help me to get the new Rlink softare release.
Thank you.
+1
0
-1
March 26, 2009 - 10:53am
Raisonance Support Team

Hi,

You must activate the account before logging. For activating the account, you must click on the link that is in the first email you received when you registered. But now that you have requested new passwords, this link might not work anymore.

So please try to create a new account, and then when you receive the email, click on the link that is in it instead of trying to log directly on the website. If that still doesn't work, do not request a new password, but instead send an email at 'support@raisonance.com', telling us your user name.

Best Regards,

Vincent
+1
0
-1
March 26, 2009 - 11:21am
Guest

OK, now I'm properly registered and get the acces.

But I'm still not able to locate the download/upgrade web page for the RLink !
Where is it ?
+1
0
-1
March 26, 2009 - 11:29am
Raisonance Support Team

Hi,

Please try from there:
http://www.mcu-raisonance.com/mcu_downloads.html

Best Regards,

Vincent
+1
0
-1
March 26, 2009 - 1:55pm
Guest

YESSSS !

Now it works ! Thanks a lot.

Please tell to your webmaster to place this giant red label in your website:

"IF YOU HAVE PURCHASED AN RLink, PLEASE DOWNLOAD OUR LATEST SOFTWARE RELEASE"

followed by the link to the downloads page !!!!!

Thank you very much.
Ciao, Marco