Topic : Core does not acknowledge

Forum : ARM

Original Post
Post Information Post
September 25, 2009 - 1:06pm
Guest

Hi,
I'm new on Ride7 developing tool. I'm using Rlink base debugger, with STR912 Hitex eval board (STR912FAW44 mcu embedded). My IDE is the last version of Ride7 (7.24.09.0251) and RKit-arm tool to (1.22.09.0254).
I tried implementing ST application note 2593 (here you can find files and documentation http://www.st.com/stonline/products/support/micro/files/an2593.zip and [url]http://www.st.com/stonline/products/literature/an/13715.pdf),[/url] but I've a problem: when I click with left mouse key on one of interrupt service routines (for example for going to routine definition) or a tooltip appear), the core stops and the Rlink can't continue debugging (a message box appears: "Core does not acknowloedge").
The problem appears again with all of project samples provided from raisonance or st.
How can I do? there are some stack problems with debugging?
I notice the absence of STR91xFA devices on Ride 7. are there any problems using STR91xF (the oldest revision) device settings?

Thanks

Fabio
Replies
Post Information Post
+1
0
-1
September 29, 2009 - 5:11pm
Guest

Hi

As treated by email:
This issue result to a bug introduced in recent version of RKit-ARM.
It does not appear on every project but if you meet this issue you need to know that:
It has been corrected and the correction will be available upon next Release.

A patch is already available from the link below:
ftp://raisonance.com/temp/STRx/ARM79RLink_Drv.dll
This file has to be placed into \ride\bin\

Regards,
Matloub
+1
0
-1
September 29, 2009 - 5:21pm
Guest

Thanks for your support. Now all works fine!

Regards

Fabio