Hello everyone, I need to use the ADC interupt on my stm32p103, with two Ultra Sound sensor.
I need the data to be read on continuous mode, and detect a threshold crossing
I use the following configuration:

void ADC_Configuration(void)
{
ADC_InitTypeDef ADC_InitStructure;
ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfChannel = 2; //1by sensor
ADC_Init(ADC1, &ADC_InitStructure);

ADC_RegularChannelConfig(ADC1, ADC_Channel_10, 1, ADC_SampleTime_239Cycles5);
ADC_RegularChannelConfig(ADC1, ADC_Channel_11, 1, ADC_SampleTime_239Cycles5);

/* Enable EOC interupt */
ADC_ITConfig(ADC1,ADC_IT_EOC, ENABLE);
ADC_Cmd(ADC1, ENABLE); //must be called after all other ADC configuration functions.
ADC_ResetCalibration(ADC1);
while(ADC_GetResetCalibrationStatus(ADC1));
ADC_StartCalibration(ADC1);
while(ADC_GetCalibrationStatus(ADC1));

ADC_SoftwareStartConvCmd(ADC1, ENABLE);
}

void NVIC_Configuration(void)
{
NVIC_InitStructure.NVIC_IRQChannel = ADC1_2_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 3;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
}

void ADC1_2_IRQHandler(void)
{
DataValue = ADC_GetConversionValue(ADC1);
if(DataValue<80) //résolution du dac=2^12=4096
clearLed;
else
setLed;
/* Clear ADC1 EOC pending interrupt bit */
ADC_ClearITPendingBit(ADC1, ADC_IT_EOC);
}

I Use the value 80, because my sensor detects objects on a range from 0 to 0.2V.
I wonder how to recover the two different value from ADC_Channel_10 and ADC_Channel_11 separatly.
Thaks for your help!