When programming my device (STMicroelectronics STR912FW44) with Ride7 I can always load the firmware no problem.
However, if I try to program with RFlasher7 it always fails at the Verify Stage.
The precise memory location where Verify fails varies but is always within the first 8 bytes or so of the memory.

The error message I get is
OPI ARM
Error: Flash and Memory are different at address 0x0
Found 0x38 in Flash expected 0x18

Are there any settings I need to change? After I choose my device, I just use the default settings.

My software versions are:

Ride7: 7.30.10.0159
RKit-ARM for Ride 1.26.10.0130
Ride7 Patch 7.30.10.0169