Topic : Missing peripherals in IDE

Forum : Ride IDE

Original Post
Post Information Post
June 29, 2010 - 3:23pm
Guest

Hi,

I am using the RIDE7 IDE with STM32F103C8T6 and the USB registers and packet information are not displayed.

If I look at memory locations 0x40005C00 or 0x40006000 there are just '--' displayed.

If I move some memory from either of these to SRAM it is there, or at least I get some data.

Is there some reason that the USB peripheral is missing from the 'Debug' list? CAN isn't there either so maybe it's to do with USB and CAn being shared.

Is there any way to at least see the packet data?

Thanks in advace.
Replies
Post Information Post
+1
0
-1
June 29, 2010 - 4:30pm
Raisonance Support Team

Hi,

Well, I can see the USB and CAN peripherals without problem on my PC.

Please check that you are using the latest versions of _both_ the Ride7 and RKit-ARM kits here:
http://www.mcu-raisonance.com/arm-download.html

Best Regards,

Vincent
+1
0
-1
June 29, 2010 - 4:35pm
Guest

Hi Vincent,

Many thanks for your input.

I downloaded those this morning before contacting the forum.

I have:
Ride7 7.30.10.0159
RKit-ARM for Ride7 1.26.10.0130
Ride7 Patch 7.30.10.0169

Is there something I am missing?

Chris
+1
0
-1
June 29, 2010 - 4:55pm
Guest

Hi again,

I do appologise, I had STM32F101C8T6 as the processor instead of STM32F103C8T6. I was wondering why it said the RAM was small too.

I visit to the opticians is in order.

Kind regards

Chris