Topic : Ride7 and ARMKit Installation Issue

Forum : Ride IDE

Original Post
Post Information Post
June 7, 2011 - 10:33pm
Guest

Hello I just downloaded Ride7_7.32.11.0112.exe and RKit-ARM_1.32.11.0116.msi. I am using an STM32 Cortex M3 microcontroller. After installing Ride7 I try to install the RKit-ARM but get the following error message: < IMAGE NO LONGER AVAILABLE ON IMAGE UPLOAD SITE > 

Replies
Post Information Post
+1
0
-1
June 8, 2011 - 10:41am
Raisonance Support Team

Hi,

You probably forgot to uninstall Ride7 before upgrading.
You need to:
1) Uninstall your RKit
2) Uninstall Ride7 (old version)
3) Install the new Ride7
4) Install the new RKit

That should do it.
Best Regards,

+1
0
-1
June 8, 2011 - 2:24pm
Guest

Hi Bruno

Thanks for your reply.

I did perform the steps you outlined above before with no luck.

However, in order to get it to install I manually had to remove the Ride7 folder in Program Files.

Regards

+1
0
-1
May 29, 2012 - 1:17pm
Guest

I have the same problem, please help me fix it.

I don't understand your last comment:

+1
0
-1
May 30, 2012 - 10:07am
Raisonance Support Team

Hi,

Some Ride7 installations suffer from an administrative rights problem. This typically happens when Ride7 has been installed in administrator mode, but *not* with the "Run as Administrator..." option. there may be other cases where this procedure is needed.

Here is a procedure that you must follow to reinstall your Raisonance tools, which will ensure that your installation is clean:

1) Download the Raisonance tools uninstaller from ftp://www.raisonance.com/pub/Utils/uninstall_raisonance.zip and execute it. It will remove all Raisonance tools from your disk.

***WARNING*** Be sure that there is no valuable data in your Ride7 installation directory and subdirs (including examples and projects created in the default Ride7 folder), as everything will be erased.

2) Download the latest Ride7 software and necessary RKit from http://support-raisonance.com/ and place them in a *local* directory on your machine (i.e., NOT on a network drive, CD-ROM or on a removable drive)

3) Right-click on the downloaded Ride7 installation package executable and select "Run as administrator", then proceed through the installation steps (REALLY DO IT!)

4) Right-click on the downloaded RKit(s) installation package(s) and select "Run as administrator", then proceed through the installation steps.

5) (First launch only) Click on "Start | Programs | Raisonance | Ride", then right-click on the Ride7 icon and select "Run as administrator", then open the "Help | About" dialog box.

6) Make a screenshot using the "Print Screen" key on your keyboard. Open the "Paint" tool from Windows and paste the screenshot into it. You can save the screen copy to an image file for later use.
Once the above steps have been followed, Ride7 should definitively be installed and in a proper shape.

7) You can optionally register your tools through Ride7 "Help | Licence" menu, following the instructions given.

In case you are using a Raisonance USB protection dongle, you will need to install the Sentinel drivers, which are available from the Ride7 installation directory, subdirectory "Bin" (default is C:\Program Files\Raisonance\Ride\Bin\)

Please let us know when the problem has been solved satisfactorily.

Regards,
The Raisonance support team.

+1
0
-1
May 30, 2012 - 3:36pm
Guest

Thanks for the detailed info, but.....
it still fails at your step 4,
I mean it comes with the error message that you can see in the first post above.

just to make sure I do everything right:
1. Downloaded the Raisonance tools uninstaller and run it.
2. manually deleted the left-over folder.
3. Downloaded the latest Ride7 software and necessary RKit (Ride7_7.38.12.0097 & RKit-ARM_1.38.12.0027), and placed them in the *local* D: partition on my machine.
4. Right-clicked on the downloaded Ride7 installation package executable and selected "Run as administrator", then proceeded through the installation steps (I REALLY DID IT!)
......I want to mention on this step that only the extracting might be run as administrator, as this is only a self-extracting compressed file.....so when I get the option to actually install RIDE7 there is no run as administartor available in the window.....
5. instalation seemed to finish OK, I even get the message it was installed successfully.
6. now comes the problem.....installing the kit....
Right-clicked on the downloaded KIT installation package executable and selected "Run as administrator", then proceeded through the installation steps....
.....at the begining it detects RIDE7 as being installed...but later it says it won't work if RIDE7 IDE isn't installed.....as in the first poster's picture.

so what did I just installed earlier??? not RIDE7 IDE??? what is this file: Ride7_7.38.12.0097????

my machine...win7_32 bit
I tried installing it in:
C:\program file\raisonance
or
C:\raisonance
or
C:\ride
or
C:\program file\ride

all with the same wonderfull effect.
of course that before each of these installs I did the un-install as instructed.

+1
0
-1
May 30, 2012 - 4:11pm
Raisonance Support Team

Hmmmm... looks strange. Usually the autoextractible Ride7 setup executable executes automatically afetr extraction.
In case you want to proceed more "manually", here is a procedure that may work in your case:

- Uninstall everything (just as above)
- Open a command prompt as administrator: Find the "Console" application from you Windows startup menu, right-click it and "run as admin".
- If your installation files are already extracted, run the .msi installer FROM THE ADMIN COMMAND PROMPT. (type the file name then press "enter").
- Same from your RKit.
- Next you can proceed to step 5) above.

Let us know if this fixes your problem.

If you still have some problems, we need the following information about your configuration:
- Version of Windows: At a command prompt type the following command: "systeminfo.exe", which gives you a system report. We need the full "Operating System" and "Version" from the report.
- Version of Ride7 and RKit that you are using. You can get these from the Ride7 "Help | About" dialog box.
- Your Ride7 serial key or your RLink/Primer/Open4 serial number.
Please check from the Raisonance downloads page at http://support-raisonance.com that you are using the latest version of the tools.

Notes:
1) Raisonance toolsets and Ride7 operate on Windows 7 (32 and 64-bit), Windows Vista (32 and 64-bit) and Windows XP SP3 (32-bit only). Other versions of Windows, including Windows 2000, Windows XP 64-bit and Windows Server, are not supported.
2) Only native versions of Windows are supported. Emulators such as VMware, QEMU, Citrix, Wine, Xen (or others) are not supported.

Best Regards,

+1
0
-1
May 31, 2012 - 11:50am
Guest

No, it did not work.

Here's the requested info:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Roe>systeminfo.exe

Host Name: ROE-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Roe
Registered Organization:
Product ID: 00426-OEM-8992662-00006
Original Install Date: 25/05/2012, 09:03:33
System Boot Time: 31/05/2012, 08:17:07
System Manufacturer: To Be Filled By O.E.M.
System Model: To Be Filled By O.E.M.
System Type: X86-based PC
Processor(s): 1 Processor(s) Installed.
[01]: x64 Family 6 Model 23 Stepping 10 GenuineIntel
~2793 Mhz
BIOS Version: American Megatrends Inc. P1.40, 05/02/2009
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume1
System Locale: en-gb;English (United Kingdom)
Input Locale: en-gb;English (United Kingdom)
Time Zone: (UTC) Dublin, Edinburgh, Lisbon, London
Total Physical Memory: 2,038 MB
Available Physical Memory: 888 MB
Virtual Memory: Max Size: 2,038 MB
Virtual Memory: Available: 882 MB
Virtual Memory: In Use: 1,156 MB
Page File Location(s): N/A
Domain: HOME
Logon Server: \\ROE-PC
Hotfix(s): 13 Hotfix(s) Installed.
[01]: KB971033
[02]: KB2425227
[03]: KB2475792
[04]: KB2479628
[05]: KB2479943
[06]: KB2482017
[07]: KB2484033
[08]: KB2485376
[09]: KB2488113
[10]: KB2502285
[11]: KB2505438
[12]: KB958488
[13]: KB976902
Network Card(s): 1 NIC(s) Installed.
[01]: Realtek RTL8168D/8111D Family PCI-E Gigabit Eth
ernet NIC (NDIS 6.20)
Connection Name: Local Area Connection
DHCP Enabled: Yes
DHCP Server: 10.1.1.2
IP address(es)
[01]: 10.1.1.15
[02]: fe80::ddd9:84a9:7a07:6eb7

==============

Ride7 - 7.38.12.0097
RKit-ARM_1.38.12.0027...can't install it.
we have 2 RLINK USB programmers but none show any serial (or any kind of info on them).

+1
0
-1
June 1, 2012 - 9:52am
Raisonance Support Team

Hi,

When Ride7 is installed, can you check the registries with regedit (launched as administrator) and tell us the keys and their values in "HKLM\Software\Raisonance\Ride7\Default Directories"?

Regards

+1
0
-1
June 1, 2012 - 10:46am
Guest

Hi Stephane,

There seems to be a problem here in the registry.

I click on the srtart orb, write regedit in the search programs and files, (don't hit enter yet), regedit appears at the top of my list (the only in the list anyway), right click on it and run as administrator.
It opens OK, I go to...
HKEY_LOCAL_MACHINE\SOFTWARE\RAISONANCE\Ride7
there are 2 folders in there: Default Directories and HardKeyLock.
if I go into HardKeyLock folder I can see some keys and their data.
but as you requested the keys in Default Directories folder....when I try to go into this folder I get an error message...
Default Directories cannot be opened.
An error is preventing this key from being opened.
Details: Access is denied.
.....end of error message.

and of course I don't see nothing (no keys) in the right panel.

Just wanted to mention that due to this system (....I post a reply that needs to be aproved by a moderator....), it seems that my posts are aproved by next day.
As today is Friday, and we are finishing at 3 o'clock, the next 3 weeks I'll be in holiday.
So if this post of mine would be aproved by tomorrow, then I won't read it until 3 weeks from now.....no computers for me in holiday!!!

So most probably we will carry on solving this misery (....sorry I meant mystery) after 3 weeks.

Thanks.

+1
0
-1
June 1, 2012 - 11:19am
Raisonance Support Team

I made you an approved member and your posts will not require approval anymore.

I will let Stephane answer about the registry.

+1
0
-1
June 8, 2012 - 2:02pm
Raisonance Support Team

It looks like you had Ride6 previously installed:
http://forum.raisonance.com/viewtopic.php?id=3805

Stéphane

+1
0
-1
July 10, 2018 - 10:43pm
peter Marker

I understand your problem, you a solve it from Dell printer support number . I lo faced this issue and solve it from them.

+1
0
-1
October 24, 2018 - 1:49pm
ethan john

Your post is very nice to thank you for sharing an informative post. 

      If anyone using a router and face any problem related to router click here 

https://www.belkinroutersupportnumber.com/blog/steps-to-fix-belkin-router-error-651/
+1
0
-1
October 30, 2018 - 9:46am
john taylor
+1
0
-1
November 20, 2018 - 11:26am
Robert Roy

I am here with the hope from the Raisoonance Team, and so feel free to write some few words regarding my issue I was facing when tried to get connect the Epson Printer with wifi and it throws an Error of not connected. I also got many more updates on https://www.epsonsupport247.com/epson-printer-wifi-connect-error/  

+1
0
-1
June 21, 2019 - 5:00pm
waqas ahmed

hello dear,

in the above problem, i am unable to find the final solution proposed after:

June 1, 2012 - 11:19am
Raisonance Support Team
please guide to solve my similar problem.Ride 7 error
+1
0
-1
August 1, 2019 - 9:22am
Lamjed Mtimet

Hello,

Thank you for using Raisonance products.

Please deleted all Raisonance registries manually and install Ride 7 and then the needed Rkit.

Best regards,

Raisonance Support Team