Forum : ST7/STM8
Original Post
| Post Information | Post |
|---|---|
|
March 3, 2016 - 9:27am
|
Hi, Is there a reference SDK for the development of ST7FSCR or basically we can implement any sample from ST7 family into it. Thanks. |
Hello,
Could you provide us more information about your issue?
which SDK do you want to use? sample? do you mean C code example?
Yes C Code example will be great. Basically we have bought the RLink-Std and ST7 chip . To proceed on the development of ST7FSCR firmware chip do we require any specific SDK or specific libraries from you? This is due to when we purchased the hardware it doesnt comes with any CD for any software installation. Appreciate you may help on this.
Thanks
Exactly, we do not provide any CDs but you can download and install Ride7 (http://support.raisonance.com/content/ride) and the Rkit-STM8 (http://support.raisonance.com/content/rkit-stm8), all information to install these software are provided on the download specific page or at our FAQ http://support.raisonance.com/content/how-do-i-install-raisonance-tools
for further information, please visit our FAQ
Concerning the C examples, we provide some c project for ST7 family at C:\Raisonance\Ride\Examples\ST7 (Ride7 and the Rkit-STM8 must be installed)
In order to get more information about your chip, I suggest you to read the data sheet provided by ST at http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00003037.pdf
Please have a look also to the different application note, user manual and examples at http://www.st.com/web/catalog/mmc/FM141/SC1714/LN1290/PF77596#
I hope it helps.
Best regards,