Topic : Using 2 UARTs/USARTs at a time on ReVa 3.3

Forum : ARM

Original Post
Post Information Post
January 9, 2011 - 6:44pm
Guest

Hi

I am developing an application in which there are 2 peripherals that use
UART based communication. SER1 port has been provided on ReVa 3.3.So I am able to connect
to one of the peripheral. Is there a way to connect both at the same time may be using the jumpers etc.

Board : ReVa 3.3
Processor : STM32F107VCT6

Thx in advance
Lokesh Siddhu